In stock as of 2016, SDI Red Series 16V 2.0 liter turbocharged camshaft set: For 1985-1993(Plus 1994 Convertible) 900 turbo, the 1994-1998 2.0 liter turbo 900 or 9-3 turbo from 1999-2002 and 1986-1990 9000 turbo with a NEW profile. Our camshaft sets will provide an enhancement to nearly any B202, B204, turbocharged engine applications and, upon installation, typically allow for an additional 27-33 horsepower gain.
Our Red Series camshaft set(Intake And Exhaust) for the turbocharged SAAB 900/9000/9-3 is an exciting engine modification which is favored by our customers seeking a more progressive engine performance from the turbocharged 2.0l SAAB!
Our upgraded camshaft lobe separation is adjusted to perform much more aggressively towards factory RPM limit of 6000-6500. This set also provides a limited exhaust duration which will greatly increase exhaust velocities which are driving the engine's turbocharger boost pressure potentials! The intake duration is extended 11 degrees which allows for more an increase of air/fuel entering the engine during it's intake stroke. Increased lift is also provided to work within the maximum allowable compensation from the SAAB factory hydraulic lifters. This is a direct replacement camshaft without the need for additional modifications and will have no, or very limited, effect to idle quality, emissions, and lower RPM engine performance. Expected engine performance gains for most applications towards 27-33 BHP and a peak horsepower increase at 2700 RPM which greatly reduces turbocharger lag!
Our Red Series camshafts are precision ground and then fully Parkerized/hardened to provide maximum service life...we even offer a lifetime warranty against wear on these performance camshafts! Our camshafts are offered on exchange only and purchase will require the return of the SAAB original/OEM camshafts upon installation of our upgrade camshaft set.