16V Magnecor Ignition Wire Set 1985-1993 900/9000 | |
| |
1985 - 1993 16 Valve 900 or 9000 Magnecor wire set (4 plug wires and 1 coil to distr. wire). Will fit all 1985 -1993 (94 convertible) 900 turbo and non-turbo16V application (look for valve cover indicating "16 Valve" as picture above) | USD76.72
|
| |
| 1985 - 1993 16 Valve 900 or 9000 Saab high performance Magnecor ignition wire set (4 plug wires and 1 coil to distr. wire). Will fit all 1985 -1993 (94 convertible) 900 turbo and non-turbo16V application (look for valve cover indicating "16 Valve" as picture above). These same ignition wire sets will also fit all 9000 from 1986-1989.
Your OEM SAAB ignition wires are of the resistor/carbon type which were chosen for their ability to reduce radio interference and, of course, the low cost…they are not, however, going to deliver optimum spark when your engine requires it. For years there have been several upgrade wire manufacturers touting their products low resistance and hot spark ability. Although they may have been able to prove that they work on some cars, your SAAB may have a breakerless/hall effect ignition system that can actually receive interference from such wires. SWEDISH DYNAMICS has tested several of these so-called Super Wires on SAAB automobiles with disappointing results. Usually we find that they do more harm than good and, in some cases, with turbo charged vehicles, we lost 5-6 psi boost due to ignition/hall effect interference being delivered to the engine's APC system. The Magnecor wire will give the advantages of low resistance without interference to the electronic engine management system. This means full boost with no fluctuation or limitation due to EMI disturbances at the APC control signal. Magnecor engineering came up with an EMI suppressed conductor within the 8mm-diameter silicone housing and the end result is a wire that can deliver more coil energy without interfering with engine electronics. We feel that these wires are the absolute best for Saab high performance (and OEM replacements, as well) applications and, due to the fact that these are not a carbon/degrading type, they will last a lifetime.
We receive many questions with regard to larger diameter 8.5 and 10mm Magnecor wires. These wires will, indeed, reduce EMI interference over the 8mm wire but will also provide less spark energy than the 8mm. They are designed for highly upgraded ignition systems only and will not outperform the 8mm wire when applied to the OEM Saab. We do carry the 8.5 and 10mm Magnecor wires for special ignition applications...please contact us for details.
Your wires have been through enough…isn't it time to take a step forward to a SWEDISH DYNAMICS/MAGNECOR competition ignition wire set!?
|
| Features:
-
Simple installation.
-
Does not interfere with ignition electronics.
-
Maximizes spark delivery.
|
|
| Transmission: | Benefits Include: |
|
| Weight: | 2.00 lb |
|
| Reference: | 16Vignwire |
|
| Payment Methods |
| MasterCard, Visa, COD (Money order upon deliver) is available also at a $8.50 additonal UPS fee. type "COD" |
|
