16V 2.3l Turbo Camshafts: for 9-3, 9-5, or 9000 2.3
liter turbo | |
| |
| USD449.95
|
| |
| Red Series 16V 2.3 Liter Turbo Camshafts: For 1991-1998 9000 turbo
or any turbocharged 9-3 or 9-5 with 2.3 liter engine. NEW profile for 2011. This is the last word in
2.3 liter engine modifications while retaining factory engine/fuel management (ECU) rev. limits. Lobe separation adjusted to perform much more aggressively towards factory RPM limit of 6000-6500. Exhaust duration limited to increase exhaust velocities and boost potentials and intake duration extended 14 degrees! Increased lift is modified to work within the maximum allowable compensation from factory hydraulic lifters. This is a "drop-in" camshaft without the need for additional modifications and will have no or very limited effect to idle quality, emissions, and low end performance.
Our Red Series camshafts are precision ground and then fully Parkerised/hardened to provide maximum service life...we even offer a lifetime warranty against wear on these performance camshafts!
Our test Viggen showed a 36 BHP improvement with these camshafts but results may
varry relative to additional engine modifications, etc.
Mandatory modifications: None
Recommended Modifications: Stage 1 valve springs, fuel enrichment with our RRFPR or Fuel ECU EPROM
Offered on exchange only and purchase will require return of original/OEM camshafts upon installation of our upgrades.
|
| |
| Payment Methods |
| MasterCard, Visa, COD (Money order upon deliver) is available also at a $8.50 additonal UPS fee. type "COD" |
|
